Brake Controler – Elecbrake Wireless
Introducing Australia’s first Bluetooth Electric Brake Controller.
Elecbrakes is an Australian Manufactured, Designed and Invented Bluetooth electric brake controller that allows a trailer to comply with ADR38/03 and VSB1* ensuring you can tow your trailer with a suitable tow vehicle easily, safely and legally in all States and Territories of Australia.
The unit operates with 12V or 24V tow vehicles and comes with a 2 year warranty.
*To comply with ADR38/03 and VSB1 the smart Phone App must have Bluetooth connection with the controller; the smart phone MUST be securely mounted within the drivers reach and connected to a power source.
Note: A wireless remote control unit is now available as an alternative to using a smart phone. Part No AL03548.
The Elecbrakes system is designed to be installed on a trailer and does not require any modification to the tow vehicle.
Elecbrakes wireless electronic brake controller is revolutionising the towing process by eliminating the need for modification to your to vehicle. Designed and assembled in Australia, this simple-to-use brake controller can be fitted to any trailer. It is controlled through Bluetooth and can be synced to any smart phone device.
The smart Phone App has been developed as a driving aid and requires minimal input from the driver to set the brake system to the driving conditions.
The Elecbrake App provides the user with the ability to monitor, configure programs and control brake response from the Tow Vehicle. The Elecbrake App also provides live data and historical information that can assist in defining service intervals for trailer maintenance.
The App allows firmware to be pushed to the controller ensuring you always have the most up to date trailer brake system on the market. Elecbrakes employs a high-speed microprocessor and various sensors which continuously sample various operating parameters at over 1000 times per second. For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures the device can be mounted anywhere on the trailers draw bar.
Elecbrakes is powered via the Tail Lights, a second input is provided if the user prefers an Auxiliary power source. And the system has been designed to continue operating even if the Bluetooth signal is interrupted or lost
The Elecbrake Controller has been designed for Australian Conditions.
Housed in Tough fibre reinforced housing and fully encased in urethane, ensuring the electronics are fully protected from water, dust and vibration.
When fitted to trailers greater the 2000Kg GTM the brake system must also be fitted with a compliant emergency brake controller. (Break away unit)
PRODUCT SPECS
| Part Number | Description |
| AL03533 | Elecbrake. Bluetooth Electric Brake Controler. |
| AL03548 | Elecbrake optional wireless remote. |
| AL03557 | Trailer Wired Leader cable. |
| AL03551 | Plug n Play lead. 12pin – 12pin flat. |
| AL03552 | Plug n Play lead. 7pin – 7 pin flat |
| ELBC2000 Specifications | |||
| Parameter | Min | Max | Units |
| Supply Voltage | 10 | 32 | Volts |
| Output Load * | .75 | – | Ohms |
| Output Current ** | 0 | 16 | Amps |
| Output Voltage | 0 | 12 | Volts RMS |
| Radio Freq | 2.4 | GHz | |
| Range | >30 | Mtrs | |
| Operating Temp | -20 | +85 | Celsius |
| Water Submersion 1mtr | >24 | Hours | |
* 4 x3.0 Ohm brake magnets wired in parallel ** Controller intelligently shares load with multiple supply circuits | |||
PRODUCT PHOTOS
Optional Plug & Play Pach leads.
AL03548 – Optional wireless remote.
